NCERT Solutions Class 12

NCERT SolutionsMathematics
 Relations and Functions : NCERT Solutions – Class 12 Maths (Ex 1)
 Relations and Functions : NCERT Solutions – Class 12 Maths (Ex 2)
 Relations and Functions : NCERT Solutions – Class 12 Maths (Ex 3)
 Relations and Functions : NCERT Solutions – Class 12 Maths (Ex 4)
 Relations and Functions : NCERT Solutions – Class 12 Maths (Ex 5)
 Inverse Trigonometric Function : NCERT Solutions – Class 12 Maths (Ex 1)
 Inverse Trigonometric Function : NCERT Solutions – Class 12 Maths (Ex 2)
 Inverse Trigonometric Function : NCERT Solutions – Class 12 Maths (Ex 3)
 Matrices : NCERT Solutions – Class 12 Maths (Ex 1)
 Matrices : NCERT Solutions – Class 12 Maths (Ex 2)
 Matrices : NCERT Solutions – Class 12 Maths (Ex 3)
 Matrices : NCERT Solutions – Class 12 Maths (Ex 4)
 Matrices : NCERT Solutions – Class 12 Maths (Ex 5)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 1)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 2)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 3)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 4)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 5)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 6)
 Determinants : NCERT Solutions – Class 12 Maths (Ex 7)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 1)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 2)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 3)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 4)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 5)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 6)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 7)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 8)
 Continuity and Differentiability : NCERT Solutions – Class 12 Maths (Ex 9)

NCERT SolutionsChemistry
 Aldehydes, Ketones and Carboxylic Acids : NCERT Solutions – Class 12 Chemistry
 Alcohols, Phenols and Ethers : NCERT Solutions – Class 12 Chemistry
 Amines : NCERT Solutions – Class 12 Chemistry
 Biomolecules : NCERT Solutions – Class 12 Chemistry
 Chemical Kinetics : NCERT Solutions – Class 12 Chemistry
 Chemistry in Everyday Life : NCERT Solutions – Class 12 Chemistry
 Coordination Compounds : NCERT Solutions – Class 12 Chemistry
 Electrochemistry : NCERT Solutions – Class 12 Chemistry
 General Principles and Processes of Isolation of Elements : NCERT Solutions – Class 12 Chemistry
 Haloalkanes and Haloarenes : NCERT Solutions – Class 12 Chemistry
 Polymers : NCERT Solutions – Class 12 Chemistry
 Surface Chemistry : NCERT Solutions – Class 12 Chemistry
 The dand fBlock Elements : NCERT Solutions – Class 12 Chemistry
 The pBlock Elements : NCERT Solutions – Class 12 Chemistry
 The Solid State : NCERT Solutions – Class 12 Chemistry
 Solutions : NCERT Solutions – Class 12 Chemistry

NCERT SolutionsBiology

NCERT SolutionsPhysics
 Electrostatic Potential And Capacitance : NCERT Solutions – Class 12 Physics
 Electric Charges And Fields : NCERT Solutions – Class 12 Physics
 Semiconductor Electronics: Materials, Devices And Simple Circuits : NCERT Solutions – Class 12 Physics
 Ray Optics And Optical Instruments : NCERT Solutions – Class 12 Physics
 Nuclei : NCERT Solutions – Class 12 Physics
 Moving Charges And Magnetism : NCERT Solutions – Class 12 Physics
 Magnetism And Matter : NCERT Solutions – Class 12 Physics
 Electromagnetic Induction : NCERT Solutions – Class 12 Physics
 Dual Nature Of Radiation And Matter : NCERT Solutions – Class 12 Physics
 Current Electricity : NCERT Solutions – Class 12 Physics
 Communication Systems : NCERT Solutions – Class 12 Physics
 Atoms : NCERT Solutions – Class 12 Physics
 Alternating Current : NCERT Solutions – Class 12 Physics
Nuclei : NCERT Solutions – Class 12 Physics
13.1. (a) Two stable isotopes of lithium and have respective abundances of 7.5% and 92.5%. These isotopes have masses 6.01512 u and 7.01600 u, respectively. Find the atomic mass of lithium.
(b) Boron has two stable isotopes, and. Their respective masses are 10.01294 u and 11.00931 u, and the atomic mass of boron is 10.811 u. Find the abundances of and .
Answer
(a) Mass of lithium isotope , m_{1} = 6.01512 u
Mass of lithium isotope , m_{2} = 7.01600 u
Abundance of , η_{1}= 7.5%
Abundance of , η_{2}= 92.5%
The atomic mass of lithium atom is given as:
(b) Mass of boron isotope , m_{1} = 10.01294 u
Mass of boron isotope , m_{2} = 11.00931 u
Abundance of , η_{1} = x%
Abundance of , η_{2}= (100 − x)%
Atomic mass of boron, m = 10.811 u
The atomic mass of boron atom is given as:
And 100 − x = 80.11%
Hence, the abundance of is 19.89% and that of is 80.11%.
13.2. The three stable isotopes of neon: and have respective abundances of 90.51%, 0.27% and 9.22%. The atomic masses of the three isotopes are 19.99 u, 20.99 u and 21.99 u, respectively. Obtain the average atomic mass of neon.
Answer
Atomic mass of , m_{1}= 19.99 u
Abundance of , η_{1 }= 90.51%
Atomic mass of , m_{2 }= 20.99 u
Abundance of , η_{2 }= 0.27%
Atomic mass of , m_{3 }= 21.99 u
Abundance of , η_{3} = 9.22%
The average atomic mass of neon is given as:
13.3. Obtain the binding energy (in MeV) of a nitrogen nucleus, given =14.00307 u
Answer
Atomic mass of nitrogen, m = 14.00307 u
A nucleus of nitrogen contains 7 protons and 7 neutrons.
Hence, the mass defect of this nucleus, Δm = 7m_{H} + 7m_{n} − m
Where,
Mass of a proton, m_{H} = 1.007825 u
Mass of a neutron, m_{n}= 1.008665 u
∴Δm = 7 × 1.007825 + 7 × 1.008665 − 14.00307
= 7.054775 + 7.06055 − 14.00307
= 0.11236 u
But 1 u = 931.5 MeV/c^{2}
∴Δm = 0.11236 × 931.5 MeV/c^{2}
Hence, the binding energy of the nucleus is given as:
E_{b} = Δmc^{2}
Where,
c = Speed of light
∴E_{b }= 0.11236 × 931.5
= 104.66334 MeV
Hence, the binding energy of a nitrogen nucleus is 104.66334 MeV.
13.4. Obtain the binding energy of the nuclei and in units of MeV from the following data:
= 55.934939 u = 208.980388 u
Answer
Atomic mass of, m_{1} = 55.934939 u
nucleus has 26 protons and (56 − 26) = 30 neutrons
Hence, the mass defect of the nucleus, Δm = 26 × m_{H} + 30 × m_{n} − m_{1}
Where,
Mass of a proton, m_{H} = 1.007825 u
Mass of a neutron, m_{n} = 1.008665 u
∴Δm = 26 × 1.007825 + 30 × 1.008665 − 55.934939
= 26.20345 + 30.25995 − 55.934939
= 0.528461 u
But 1 u = 931.5 MeV/c^{2}
∴Δm = 0.528461 × 931.5 MeV/c^{2}
The binding energy of this nucleus is given as:
E_{b}_{1} = Δmc^{2}
Where,
c = Speed of light
∴E_{b}_{1} = 0.528461 × 931.5
= 492.26 MeV
Average binding energy per nucleon
Atomic mass of, m_{2} = 208.980388 u
nucleus has 83 protons and (209 − 83) 126 neutrons.
Hence, the mass defect of this nucleus is given as:
Δm‘ = 83 × m_{H} + 126 × m_{n} − m_{2}
Where,
Mass of a proton, m_{H} = 1.007825 u
Mass of a neutron, m_{n} = 1.008665 u
∴Δm‘ = 83 × 1.007825 + 126 × 1.008665 − 208.980388
= 83.649475 + 127.091790 − 208.980388
= 1.760877 u
But 1 u = 931.5 MeV/c^{2}
∴Δm‘ = 1.760877 × 931.5 MeV/c^{2}
Hence, the binding energy of this nucleus is given as:
E_{b}_{2} = Δm‘c^{2}
= 1.760877 × 931.5
= 1640.26 MeV
Average bindingenergy per nucleon =
13.5. A given coin has a mass of 3.0 g. Calculate the nuclear energy that would be required to separate all the neutrons and protons from each other. For simplicity assume that the coin is entirely made of atoms (of mass 62.92960 u).
Answer
Mass of a copper coin, m’ = 3 g
Atomic mass of atom, m = 62.92960 u
The total number of atoms in the coin
Where,
N_{A} = Avogadro’s number = 6.023 × 10^{23}_{ }atoms /g
Mass number = 63 g
nucleus has 29 protons and (63 − 29) 34 neutrons
∴Mass defect of this nucleus, Δm‘ = 29 × m_{H} + 34 × m_{n} − m
Where,
Mass of a proton, m_{H} = 1.007825 u
Mass of a neutron, m_{n} = 1.008665 u
∴Δm‘ = 29 × 1.007825 + 34 × 1.008665 − 62.9296
= 0.591935 u
Mass defect of all the atoms present in the coin, Δm = 0.591935 × 2.868 × 10^{22}
= 1.69766958 × 10^{22} u
But 1 u = 931.5 MeV/c^{2}
∴Δm = 1.69766958 × 10^{22} × 931.5 MeV/c^{2}
Hence, the binding energy of the nuclei of the coin is given as:
E_{b}= Δmc^{2}
= 1.69766958 × 10^{22} × 931.5
= 1.581 × 10^{25 }MeV
But 1 MeV = 1.6 × 10^{−13} J
E_{b} = 1.581 × 10^{25 }× 1.6 × 10^{−13}
= 2.5296 × 10^{12} J
This much energy is required to separate all the neutrons and protons from the given coin.
13.6. Write nuclear reaction equations for
(i) αdecay of (ii) αdecay of
(iii) β^{−}decay of (iv) β^{−}decay of
(v) β^{+}decay of (vi) β^{+}decay of
(vii) Electron capture of
Answer
α is a nucleus of helium and β is an electron (e^{− }for β^{−} and e^{+} for β^{+}). In every αdecay, there is a loss of 2 protons and 4 neutrons. In every β^{+}decay, there is a loss of 1 proton and a neutrino is emitted from the nucleus. In every β^{−}decay, there is a gain of 1 proton and an antineutrino is emitted from the nucleus.
For the given cases, the various nuclear reactions can be written as:
13.7. A radioactive isotope has a halflife of T years. How long will it take the activity to reduce to a) 3.125%, b) 1% of its original value?
Answer
Halflife of the radioactive isotope = T years
Original amount of the radioactive isotope = N_{0}
(a) After decay, the amount of the radioactive isotope = N
It is given that only 3.125% of N_{0 }remains after decay. Hence, we can write:
Where,
λ = Decay constant
t = Time
Hence, the isotope will take about 5T years to reduce to 3.125% of its original value.
(b) After decay, the amount of the radioactive isotope = N
It is given that only 1% of N_{0 }remains after decay. Hence, we can write:
Since, λ = 0.693/T
Hence, the isotope will take about 6.645T years to reduce to 1% of its original value.
13.8. The normal activity of living carboncontaining matter is found to be about 15 decays per minute for every gram of carbon. This activity arises from the small proportion of radioactive present with the stable carbon isotope . When the organism is dead, its interaction with the atmosphere (which maintains the above equilibrium activity) ceases and its activity begins to drop. From the known halflife (5730 years) of, and the measured activity, the age of the specimen can be approximately estimated. This is the principle of dating used in archaeology. Suppose a specimen from Mohenjodaro gives an activity of 9 decays per minute per gram of carbon. Estimate the approximate age of the IndusValley civilisation.
Answer
Decay rate of living carboncontaining matter, R = 15 decay/min
Let N be the number of radioactive atoms present in a normal carbon containing matter.
Half life of, = 5730 years
The decay rate of the specimen obtained from the Mohenjodaro site:
R‘ = 9 decays/min
Let N’ be the number of radioactive atoms present in the specimen during the Mohenjodaro period.
Therefore, we can relate the decay constant, λand time, t as:
Hence, the approximate age of the IndusValley civilisation is 4223.5 years.
13.9. Obtain the amount of necessary to provide a radioactive source of 8.0 mCi strength. The halflife of is 5.3 years.
Answer
The strength of the radioactive source is given as:
Where,
N = Required number of atoms
Halflife of, = 5.3 years
= 5.3 × 365 × 24 × 60 × 60
= 1.67 × 10^{8} s
For decay constant λ, we have the rate of decay as:
Where, λ
For:
Mass of 6.023 × 10^{23 }(Avogadro’s number) atoms = 60 g
∴Mass of atoms
Hence, the amount of necessary for the purpose is 7.106 × 10^{−6} g.
13.10. The halflife of is 28 years. What is the disintegration rate of 15 mg of this isotope?
Answer
Half life of , = 28 years
= 28 × 365 × 24 × 60 × 60
= 8.83 × 10^{8} s
Mass of the isotope, m = 15 mg
90 g of atom contains 6.023 × 10^{23 }(Avogadro’s number) atoms.
Therefore, 15 mg of contains:
Rate of disintegration,
Where,
λ = Decay constant
Hence, the disintegration rate of 15 mg of the given isotope is
7.878 × 10^{10} atoms/s.
13.11. Obtain approximately the ratio of the nuclear radii of the gold isotope and the silver isotope.
Answer
Nuclear radius of the gold isotope = R_{Au}
Nuclear radius of the silver isotope = R_{Ag}
Mass number of gold, A_{Au} = 197
Mass number of silver, A_{Ag} = 107
The ratio of the radii of the two nuclei is related with their mass numbers as:
Hence, the ratio of the nuclear radii of the gold and silver isotopes is about 1.23.
13.12. Find the Qvalue and the kinetic energy of the emitted αparticle in the αdecay of (a) and (b).
Given = 226.02540 u, = 222.01750 u,
= 220.01137 u, = 216.00189 u.
Answer
(a) Alpha particle decay of emits a helium nucleus. As a result, its mass number reduces to (226 − 4) 222 and its atomic number reduces to (88 − 2) 86. This is shown in the following nuclear reaction.
Qvalue of
emitted αparticle = (Sum of initial mass − Sum of final mass) c^{2}
Where,
c = Speed of light
It is given that:
Qvalue = [226.02540 − (222.01750 + 4.002603)] u c^{2}
= 0.005297 u c^{2}
But 1 u = 931.5 MeV/c^{2}
∴Q = 0.005297 × 931.5 ≈ 4.94 MeV
Kinetic energy of the αparticle
(b) Alpha particle decay of is shown by the following nuclear reaction.
It is given that:
Mass of = 220.01137 u
Mass of = 216.00189 u
∴Qvalue =
≈ 641 MeV
Kinetic energy of the αparticle
= 6.29 MeV
13.13. The radionuclide ^{11}C decays according to
The maximum energy of the emitted positron is 0.960 MeV.
Given the mass values:
calculate Q and compare it with the maximum energy of the positron emitted
Answer
The given nuclear reaction is:
Atomic mass of = 11.011434 u
Atomic mass of
Maximum energy possessed by the emitted positron = 0.960 MeV
The change in the Qvalue (ΔQ) of the nuclear masses of the nucleus is given as:
Where,
m_{e} = Mass of an electron or positron = 0.000548 u
c = Speed of light
m’ = Respective nuclear masses
If atomic masses are used instead of nuclear masses, then we have to add 6 m_{e} in the case ofand 5 m_{e }in the case of.
Hence, equation (1) reduces to:
∴ΔQ = [11.011434 − 11.009305 − 2 × 0.000548] c^{2}
= (0.001033 c^{2}) u
But 1 u = 931.5 Mev/c^{2}
∴ΔQ = 0.001033 × 931.5 ≈ 0.962 MeV
The value of Q is almost comparable to the maximum energy of the emitted positron.
13.14. The nucleus decays byemission. Write down the decay equation and determine the maximum kinetic energy of the electrons emitted. Given that:
= 22.994466 u
= 22.989770 u.
Answer
In emission, the number of protons increases by 1, and one electron and an antineutrino are emitted from the parent nucleus.
emission of the nucleus is given as:
It is given that:
Atomic mass of = 22.994466 u
Atomic mass of = 22.989770 u
Mass of an electron, m_{e }= 0.000548 u
Qvalue of the given reaction is given as:
There are 10 electrons in and 11 electrons in. Hence, the mass of the electron is cancelled in the Qvalue equation.
The daughter nucleus is too heavy as compared to and . Hence, it carries negligible energy. The kinetic energy of the antineutrino is nearly zero. Hence, the maximum kinetic energy of the emitted electrons is almost equal to the Qvalue, i.e., 4.374 MeV.
13.15. The Q value of a nuclear reaction A + b → C + d is defined by
Q = [ m_{A}+ m_{b}− m_{C}− m_{d}]c^{2 }where the masses refer to the respective nuclei. Determine from the given data the Qvalue of the following reactions and state whether the reactions are exothermic or endothermic.
(i)
(ii)
Atomic masses are given to be
Answer
(i) The given nuclear reaction is:
It is given that:
Atomic mass
Atomic mass
Atomic mass
According to the question, the Qvalue of the reaction can be written as:
The negativeQvalue of the reaction shows that the reaction is endothermic.
(ii) The given nuclear reaction is:
It is given that:
Atomic mass of
Atomic mass of
Atomic mass of
The Qvalue of this reaction is given as:
The positive Qvalue of the reaction shows that the reaction is exothermic.
13.16. Suppose, we think of fission of a nucleus into two equal fragments,. Is the fission energetically possible? Argue by working out Q of the process. Given and.
Answer
The fission of can be given as:
It is given that:
Atomic mass of = 55.93494 u
Atomic mass of
The Qvalue of this nuclear reaction is given as:
The Qvalue of the fission is negative. Therefore, the fission is not possible energetically. For an energeticallypossible fission reaction, the Qvalue must be positive.
13.17. The fission properties of are very similar to those of.
The average energy released per fission is 180 MeV. How much energy, in MeV, is released if all the atoms in 1 kg of pure undergo fission?
Answer
Average energy released per fission of,
Amount of pure, m = 1 kg = 1000 g
N_{A}= Avogadro number = 6.023 × 10^{23}
Mass number of= 239 g
1 mole of contains N_{A} atoms.
∴m g of contains
∴Total energy released during the fission of 1 kg ofis calculated as:
Hence, is released if all the atoms in 1 kg of pure undergo fission.
13.18. A 1000 MW fission reactor consumes half of its fuel in 5.00 y. How much did it contain initially? Assume that the reactor operates 80% of the time, that all the energy generated arises from the fission of and that this nuclide is consumed only by the fission process.
Answer
Half life of the fuel of the fission reactor, years
= 5 × 365 × 24 × 60 × 60 s
We know that in the fission of 1 g of nucleus, the energy released is equal to 200 MeV.
1 mole, i.e., 235 g of contains 6.023 × 10^{23} atoms.
∴1 g contains
The total energy generated per gram ofis calculated as:
The reactor operates only 80% of the time.
Hence, the amount of consumed in 5 years by the 1000 MW fission reactor is calculated as:
∴Initial amount of = 2 × 1538 = 3076 kg
13.19. How long can an electric lamp of 100W be kept glowing by fusion of 2.0 kg of deuterium? Take the fusion reaction as
Answer
The given fusion reaction is:
Amount of deuterium, m = 2 kg
1 mole, i.e., 2 g of deuterium contains 6.023 × 10^{23} atoms.
∴2.0 kg of deuterium contains
It can be inferred from the given reaction that when two atoms of deuterium fuse, 3.27 MeV energy is released.
∴Total energy per nucleus released in the fusion reaction:
Power of the electric lamp, P = 100 W = 100 J/s
Hence, the energy consumed by the lamp per second = 100 J
The total time for which the electric lamp will glow is calculated as:
13.20. Calculate the height of the potential barrier for a head on collision of two deuterons. (Hint: The height of the potential barrier is given by the Coulomb repulsion between the two deuterons when they just touch each other. Assume that they can be taken as hard spheres of radius 2.0 fm.)
Answer
When two deuterons collide headon, the distance between their centres, d is given as:
Radius of 1^{st} deuteron + Radius of 2^{nd} deuteron
Radius of a deuteron nucleus = 2 fm = 2 × 10^{−15} m
∴d = 2 × 10^{−15} + 2 × 10^{−15 }= 4 × 10^{−15} m
Charge on a deuteron nucleus = Charge on an electron = e = 1.6 × 10^{−19} C
Potential energy of the twodeuteron system:
Where,
= Permittivity of free space
Hence, the height of the potential barrier of the twodeuteron system is
360 keV.
13.21.From the relation R = R_{0}A^{1}/^{3}, where R_{0} is a constant and A is the mass number of a nucleus, show that the nuclear matter density is nearly constant (i.e. independent of A).
Answer
We have the expression for nuclear radius as:
R = R_{0}A^{1}/^{3}
Where,
R_{0} = Constant.
A = Mass number of the nucleus
Nuclear matter density,
Let m be the average mass of the nucleus.
Hence, mass of the nucleus = mA
Hence, the nuclear matter density is independent of A. It is nearly constant.
13.22. For the (positron) emission from a nucleus, there is another competing process known as electron capture (electron from an inner orbit, say, the K−shell, is captured by the nucleus and a neutrino is emitted).
Show that if emission is energetically allowed, electron capture is necessarily allowed but not vice−versa.
Answer
Let the amount of energy released during the electron capture process be Q_{1}. The nuclear reaction can be written as:
Let the amount of energy released during the positron capture process be Q_{2}. The nuclear reaction can be written as:
= Nuclear mass of
= Nuclear mass of
= Atomic mass of
= Atomic mass of
m_{e} = Mass of an electron
c = Speed of light
Qvalue of the electron capture reaction is given as:
Qvalue of the positron capture reaction is given as:
It can be inferred that if Q_{2} > 0, then Q_{1 }> 0; Also, if Q_{1}> 0, it does not necessarily mean that Q_{2} > 0.
In other words, this means that ifemission is energetically allowed, then the electron capture process is necessarily allowed, but not viceversa. This is because the Qvalue must be positive for an energeticallyallowed nuclear reaction.
13.23. In a periodic table the average atomic mass of magnesium is given as 24.312 u. The average value is based on their relative natural abundance on earth. The three isotopes and their masses are (23.98504u), (24.98584u) and (25.98259u). The natural abundance of is 78.99% by mass. Calculate the abundances of other two isotopes.
Answer
Average atomic mass of magnesium, m = 24.312 u
Mass of magnesium isotope, m_{1} = 23.98504 u
Mass of magnesium isotope, m_{2 }= 24.98584 u
Mass of magnesium isotope, m_{3 }= 25.98259 u
Abundance of, η_{1}= 78.99%
Abundance of, η_{2 }= x%
Hence, abundance of, η_{3 }= 100 − x − 78.99% = (21.01 − x)%
We have the relation for the average atomic mass as:
Hence, the abundance of is 9.3% and that of is 11.71%.
13.24. The neutron separation energy is defined as the energy required to remove a neutron from the nucleus. Obtain the neutron separation energies of the nuclei and from the following data:
= 39.962591 u
) = 40.962278 u
= 25.986895 u
) = 26.981541 u
Answer
For
For
A neutron is removed from a nucleus. The corresponding nuclear reaction can be written as:
It is given that:
Mass = 39.962591 u
Mass) = 40.962278 u
Mass = 1.008665 u
The mass defect of this reaction is given as:
Δm =
∴Δm = 0.008978 × 931.5 MeV/c^{2}
Hence, the energy required for neutron removal is calculated as:
For, the neutron removal reaction can be written as:
It is given that:
Mass = 26.981541 u
Mass = 25.986895 u
The mass defect of this reaction is given as:
Hence, the energy required for neutron removal is calculated as:
13.25. A source contains two phosphorous radio nuclides (T_{1/2 =} 14.3d) and (T_{1/2} = 25.3d). Initially, 10% of the decays come from. How long one must wait until 90% do so?
Answer
Half life of, T_{1/2 =} 14.3 days
Half life of, T’_{1/2} = 25.3 days
nucleus decay is 10% of the total amount of decay.
The source has initially 10% of nucleus and 90% of nucleus.
Suppose after t days, the source has 10% of nucleus and 90% of nucleus.
Initially:
Number of nucleus = N
Number of nucleus = 9 N
Finally:
Number of
Number of
For nucleus, we can write the number ratio as:
For, we can write the number ratio as:
On dividing equation (1) by equation (2), we get:
Hence, it will take about 208.5 days for 90% decay of .
13.26. Under certain circumstances, a nucleus can decay by emitting a particle more massive than an αparticle. Consider the following decay processes:
Calculate the Qvalues for these decays and determine that both are energetically allowed.
Answer
Take a emission nuclear reaction:
We know that:
Mass of m_{1} = 223.01850 u
Mass of m_{2} = 208.98107 u
Mass of, m_{3} = 14.00324 u
Hence, the Qvalue of the reaction is given as:
Q = (m_{1} − m_{2} − m_{3}) c^{2}
= (223.01850 − 208.98107 − 14.00324) c^{2}
= (0.03419 c^{2}) u
But 1 u = 931.5 MeV/c^{2}
∴Q = 0.03419 × 931.5
= 31.848 MeV
Hence, the Qvalue of the nuclear reaction is 31.848 MeV. Since the value is positive, the reaction is energetically allowed.
Now take a emission nuclear reaction:
We know that:
Mass of m_{1} = 223.01850
Mass of m_{2} = 219.00948
Mass of, m_{3} = 4.00260
Qvalue of this nuclear reaction is given as:
Q = (m_{1} − m_{2} − m_{3}) c^{2}
= (223.01850 − 219.00948 − 4.00260) C^{2}
= (0.00642 c^{2}) u
= 0.00642 × 931.5 = 5.98 MeV
Hence, the Q value of the second nuclear reaction is 5.98 MeV. Since the value is positive, the reaction is energetically allowed.
13.27. Consider the fission of by fast neutrons. In one fission event, no neutrons are emitted and the final end products, after the beta decay of the primary fragments, are and. Calculate Q for this fission process. The relevant atomic and particle masses are
m =238.05079 u
m =139.90543 u
m = 98.90594 u
Answer
In the fission of, 10 β^{− }particles decay from the parent nucleus. The nuclear reaction can be written as:
It is given that:
Mass of a nucleusm_{1} = 238.05079 u
Mass of a nucleus m_{2} = 139.90543 u
Mass of a nucleus, m_{3} = 98.90594 u
Mass of a neutronm_{4} = 1.008665 u
Qvalue of the above equation,
Where,
m’ = Represents the corresponding atomic masses of the nuclei
= m_{1} − 92m_{e}
= m_{2} − 58m_{e}
= m_{3} − 44m_{e}
_{}= m_{4}
Hence, the Qvalue of the fission process is 231.007 MeV.
13.28. Consider the D−T reaction (deuterium−tritium fusion)
(a) Calculate the energy released in MeV in this reaction from the data:
= 2.014102 u
= 3.016049 u
(b)Consider the radius of both deuterium and tritium to be approximately 2.0 fm. What is the kinetic energy needed to overcome the coulomb repulsion between the two nuclei? To what temperature must the gas be heated to initiate the reaction? (Hint: Kinetic energy required for one fusion event =average thermal kinetic energy available with the interacting particles = 2(3kT/2); k = Boltzman’s constant, T = absolute temperature.)
Answer
(a) Take the DT nuclear reaction:
It is given that:
Mass of, m_{1}= 2.014102 u
Mass of, m_{2 }= 3.016049 u
Mass of m_{3 }= 4.002603 u
Mass of, m_{4 }= 1.008665 u
Qvalue of the given DT reaction is:
Q = [m_{1 }+ m_{2}− m_{3} − m_{4}] c^{2}
= [2.014102 + 3.016049 − 4.002603 − 1.008665] c^{2}
= [0.018883 c^{2}] u
But 1 u = 931.5 MeV/c^{2}
∴Q = 0.018883 × 931.5 = 17.59 MeV
(b) Radius of deuterium and tritium, r ≈ 2.0 fm = 2 × 10^{−15} m
Distance between the two nuclei at the moment when they touch each other, d = r + r = 4 × 10^{−15} m
Charge on the deuterium nucleus = e
Charge on the tritium nucleus = e
Hence, the repulsive potential energy between the two nuclei is given as:
Where,
∈_{0} = Permittivity of free space
Hence, 5.76 × 10^{−14} J or of kinetic energy (KE) is needed to overcome the Coulomb repulsion between the two nuclei.
However, it is given that:
KE
Where,
k = Boltzmann constant = 1.38 × 10^{−23} m^{2} kg s^{−2} K^{−1}
T = Temperature required for triggering the reaction
Hence, the gas must be heated to a temperature of 1.39 × 10^{9} K to initiate the reaction.
13.29. Obtain the maximum kinetic energy of βparticles, and the radiation frequencies of γ decays in the decay scheme shown in Fig. 13.6. You are given that
m (^{198}Au) = 197.968233 u
m (^{198}Hg) =197.966760 u
Answer
It can be observed from the given γdecay diagram that γ_{1} decays from the 1.088 MeV energy level to the 0 MeV energy level.
Hence, the energy corresponding to γ_{1}decay is given as:
E_{1} = 1.088 − 0 = 1.088 MeV
hν_{1}= 1.088 × 1.6 × 10^{−19} × 10^{6} J
Where,
h = Planck’s constant = 6.6 × 10^{−34} Js
ν_{1 }= Frequency of radiation radiated by γ_{1}decay
It can be observed from the given γdecay diagram that γ_{2} decays from the 0.412 MeV energy level to the 0 MeV energy level.
Hence, the energy corresponding to γ_{2}decay is given as:
E_{2} = 0.412 − 0 = 0.412 MeV
hν_{2}= 0.412 × 1.6 × 10^{−19} × 10^{6} J
Where,
ν_{2 }= Frequency of radiation radiated by γ_{2}decay
It can be observed from the given γdecay diagram that γ_{3} decays from the 1.088 MeV energy level to the 0.412 MeV energy level.
Hence, the energy corresponding to γ_{3}decay is given as:
E_{3} = 1.088 − 0.412 = 0.676 MeV
hν_{3}= 0.676 × 10^{−19} × 10^{6} J
Where,
ν_{3 }= Frequency of radiation radiated by γ_{3}decay
Mass of = 197.968233 u
Mass of = 197.966760 u
1 u = 931.5 MeV/c^{2}
Energy of the highest level is given as:
β_{1 }decays from the 1.3720995 MeV level to the 1.088 MeV level
∴Maximum kinetic energy of the β_{1 }particle = 1.3720995 − 1.088
= 0.2840995 MeV
β_{2 }decays from the 1.3720995 MeV level to the 0.412 MeV level
∴Maximum kinetic energy of the β_{2 }particle = 1.3720995 − 0.412
= 0.9600995 MeV
13.30. Calculate and compare the energy released by a) fusion of 1.0 kg of hydrogen deep within Sun and b) the fission of 1.0 kg of ^{235}U in a fission reactor.
Answer
(a) Amount of hydrogen, m = 1 kg = 1000 g
1 mole, i.e., 1 g of hydrogen () contains 6.023 × 10^{23} atoms.
∴1000 g of contains 6.023 × 10^{23} × 1000 atoms.
Within the sun, four nuclei combine and form one nucleus. In this process 26 MeV of energy is released.
Hence, the energy released from the fusion of 1 kg is:
(b) Amount of = 1 kg = 1000 g
1 mole, i.e., 235 g of contains 6.023 × 10^{23} atoms.
∴1000 g ofcontains
It is known that the amount of energy released in the fission of one atom of is 200 MeV.
Hence, energy released from the fission of 1 kg of is:
∴
Therefore, the energy released in the fusion of 1 kg of hydrogen is nearly 8 times the energy released in the fission of 1 kg of uranium.
13.31. Suppose India had a target of producing by 2020 AD, 200,000 MW of electric power, ten percent of which was to be obtained from nuclear power plants. Suppose we are given that, on an average, the efficiency of utilization (i.e. conversion to electric energy) of thermal energy produced in a reactor was 25%. How much amount of fissionable uranium would our country need per year by 2020? Take the heat energy per fission of ^{235}U to be about 200MeV.
Answer
Amount of electric power to be generated, P = 2 × 10^{5} MW
10% of this amount has to be obtained from nuclear power plants.
∴Amount of nuclear power,
= 2 × 10^{4} MW
= 2 × 10^{4} × 10^{6} J/s
= 2 × 10^{10} × 60 × 60 × 24 × 365 J/y
Heat energy released per fission of a ^{235}U nucleus, E = 200 MeV
Efficiency of a reactor = 25%
Hence, the amount of energy converted into the electrical energy per fission is calculated as:
Number of atoms required for fission per year:
1 mole, i.e., 235 g of U^{235} contains 6.023 × 10^{23} atoms.
∴Mass of 6.023 × 10^{23} atoms of U^{235 }= 235 g = 235 × 10^{−3} kg
∴Mass of 78840 × 10^{24} atoms of U^{235}
Hence, the mass of uranium needed per year is 3.076 × 10^{4} kg.